testcopy.tech

Ploter Epson SC-T5200 error 1A39. What is problem FFC,PH, Main board or only cleaninig PH? Any sugestion?

Code: 1A39
Description:
Hardware Head error
Causes:
• Connection failure of the HEAD FFC.
• Electric parts or components are damaged due to improper HEAD FFC connection such as connecting it at an angle.
• The drive circuit in the PRINT HEAD is damaged.
• The fuse of the MAIN BOARD has blown.
Remedy:
Is the HEAD FFC connected properly without being connected at an angle and any abnormalities such as peeled terminals?
1. Replace the HEAD FFC.
2. Replace the PRINT HEAD.
3. Replace the MAIN BOARD.

this YT option is possible?

I tried procedure Ink charge via video YT.I get blank paper without inks and again same error 1A39.PH and MBoard are broken. Thx all

ERROR 1A39: check FUSE on MB, Check cables on PH, replace PrintHead.