Ploter SC-T5200 error 1A39
Правила форума
Картинки, фото или файлы загружаются в сообщение при нажатии на кнопку Добавить фото или файлы в редакторе сообщений.
Краткое описание функционала форума
Картинки, фото или файлы загружаются в сообщение при нажатии на кнопку Добавить фото или файлы в редакторе сообщений.
Краткое описание функционала форума
Ploter SC-T5200 error 1A39
Ploter Epson SC-T5200 error 1A39. What is problem FFC,PH, Main board or only cleaninig PH? Any sugestion?
-
- Сообщения: 92
- Стаж: 2 года 4 месяца
- Откуда: Мурманск
- Благодарил (а): 11 раз
- Поблагодарили: 10 раз
- Репутация:
Ploter SC-T5200 error 1A39
Code: 1A39
Description:
Hardware Head error
Causes:
• Connection failure of the HEAD FFC.
• Electric parts or components are damaged due to improper HEAD FFC connection such as connecting it at an angle.
• The drive circuit in the PRINT HEAD is damaged.
• The fuse of the MAIN BOARD has blown.
Remedy:
Is the HEAD FFC connected properly without being connected at an angle and any abnormalities such as peeled terminals?
1. Replace the HEAD FFC.
2. Replace the PRINT HEAD.
3. Replace the MAIN BOARD.
Description:
Hardware Head error
Causes:
• Connection failure of the HEAD FFC.
• Electric parts or components are damaged due to improper HEAD FFC connection such as connecting it at an angle.
• The drive circuit in the PRINT HEAD is damaged.
• The fuse of the MAIN BOARD has blown.
Remedy:
Is the HEAD FFC connected properly without being connected at an angle and any abnormalities such as peeled terminals?
1. Replace the HEAD FFC.
2. Replace the PRINT HEAD.
3. Replace the MAIN BOARD.
Ploter SC-T5200 error 1A39
I tried procedure Ink charge via video YT.I get blank paper without inks and again same error 1A39.PH and MBoard are broken. Thx all
-
- Сообщения: 55
- Стаж: 1 год 6 месяцев
- Откуда: KZ Павлодар
- Поблагодарили: 1 раз
- Репутация:
-
- Похожие темы
- Ответы
- Просмотры
- Последнее сообщение
Кто сейчас на конференции
Сейчас этот форум просматривают: MegaPrint, Xtheme и 1 гость