Страница 1 из 1
Epson L1300 missing segment color
Добавлено: 24 авг 2022, 15:14
3cxmoskva
I have L1300 with missing blue color.I change adapter and get half black color.After one head cleaning again missing blue-cyan color
Added after 5 minutes 5 seconds:
pump,printheads?
Epson L1300 missing segment color
Добавлено: 25 авг 2022, 04:03
manik.76
What do you print on, CISS, originals ???
Check the fit of the cartridges to the print head. It is possible to suck air in 2 colors. My imho.
Epson L1300 missing segment color
Добавлено: 25 авг 2022, 07:32
xCooLx
Soak the print head, change the dampers and ink. Unscrew the manifold at the printhead and rinse with a harder rinse.
Шут знает нормально переводчик перевел или нет
Epson L1300 missing segment color
Добавлено: 25 авг 2022, 08:20
manik.76
xCooLx писал(а): ↑25 авг 2022, 07:32
Шут знает нормально переводчик перевел или нет
Да вроде норм
Замочите печатающую головку, поменяйте демпферы и чернила. Отвинтите коллектор на печатающей головке и промойте более сильным ополаскивателем.
Epson L1300 missing segment color
Добавлено: 25 авг 2022, 14:06
3cxmoskva
I put all the new inks and I spilled the old inks from the tank. Now there is no problem. Thank you all