Всем доброго времени суток!
Попался геморойчик HP Laserjet P4015n с ошибкой 13.20.00 либо 13.00.00 и постоянно заваливается в очистку тракта бумаги.
Принтер был разобран, датчики все продуты, ситуацию не поменяло от слова совсем.
Может кто сталкивался с подобным.
HP Laserjet P4015n ошибка 13.20.00
Правила форума
Картинки, фото или файлы загружаются в сообщение при нажатии на кнопку Добавить фото или файлы в редакторе сообщений.
Краткое описание функционала форума
Картинки, фото или файлы загружаются в сообщение при нажатии на кнопку Добавить фото или файлы в редакторе сообщений.
Краткое описание функционала форума
-
- Сообщения: 223
- Стаж: 2 года 3 месяца
- Откуда: Ставрополь
- Благодарил (а): 8 раз
- Поблагодарили: 39 раз
- Репутация:
HP Laserjet P4015n ошибка 13.20.00
Display:
13.20.00 JAM INSIDE <LOCATION>
Description:
Paper has not moved past a certain paper sensor. <LOCATION> can be one of the following locations. • TRAY 2 • TOP COVER • REAR DOOR • DUPLEXER
Remedy:
• TRAY 2 Remove the tray, and then check the paper path for obstructions. Perform a manual sensor test and observe the prefeed sensor (PS102) status (B). Toggle the sensor flag to determine if the status changes. • TOP COVER Remove the print cartridge, and then check the paper path for obstructions. Verify that the top-of-page sensor (PS103) and the media width sensors (PS106 and PS108) are unblocked. Perform a manual sensor test and observe the status of these sensors. Toggle the sensor flags to determine if their status changes. • REAR DOOR Open or remove the rear face-up bin, and then check the paper path on each side of the fusing assembly for obstructions. Remove the fuser, if necessary. Perform a manual sensor test and observe the fuser delivery sensor (PS700) status (C). Toggle the sensor flag to determine if the status changes. • DUPLEXER Remove the duplexer, and then check the paper path for obstructions. If the message persists, replace the duplexer.
Отправлено спустя 1 минуту 21 секунду:
Был недавно из похожих. Все в куче было и соленоид и датчики и плюс ко всему свернули в дуплексе ролики (как ума не приложу)
13.20.00 JAM INSIDE <LOCATION>
Description:
Paper has not moved past a certain paper sensor. <LOCATION> can be one of the following locations. • TRAY 2 • TOP COVER • REAR DOOR • DUPLEXER
Remedy:
• TRAY 2 Remove the tray, and then check the paper path for obstructions. Perform a manual sensor test and observe the prefeed sensor (PS102) status (B). Toggle the sensor flag to determine if the status changes. • TOP COVER Remove the print cartridge, and then check the paper path for obstructions. Verify that the top-of-page sensor (PS103) and the media width sensors (PS106 and PS108) are unblocked. Perform a manual sensor test and observe the status of these sensors. Toggle the sensor flags to determine if their status changes. • REAR DOOR Open or remove the rear face-up bin, and then check the paper path on each side of the fusing assembly for obstructions. Remove the fuser, if necessary. Perform a manual sensor test and observe the fuser delivery sensor (PS700) status (C). Toggle the sensor flag to determine if the status changes. • DUPLEXER Remove the duplexer, and then check the paper path for obstructions. If the message persists, replace the duplexer.
Отправлено спустя 1 минуту 21 секунду:
Был недавно из похожих. Все в куче было и соленоид и датчики и плюс ко всему свернули в дуплексе ролики (как ума не приложу)
-
- Сообщения: 278
- Стаж: 2 года 4 месяца
- Блог: 1 пост
- Благодарил (а): 13 раз
- Поблагодарили: 39 раз
- Репутация:
HP Laserjet P4015n ошибка 13.20.00
1. Press Menu .
2. Press the down arrow to highlight DIAGNOSTICS, and then press OK.
3. Press the down arrow to highlight MANUAL SENSOR TEST 1, and then press OK.
4. Use the arrow buttons to highlight the sensor letter code that you want to test, and then press
OK.
<сохрани себя>*<save yourself>
-
- Сообщения: 170
- Стаж: 2 года 4 месяца
- Откуда: Новочеркасск
- Благодарил (а): 9 раз
- Поблагодарили: 14 раз
- Репутация:
HP Laserjet P4015n ошибка 13.20.00
Самое прикольное, подкинул я другой картридж и он тварь заработал. Каким боком картридж имел отношение к замятию
-
- Сообщения: 56
- Стаж: 1 год 10 месяцев
- Откуда: Иркутск
- Благодарил (а): 14 раз
- Поблагодарили: 4 раза
- Репутация:
-
- Похожие темы
- Ответы
- Просмотры
- Последнее сообщение
Кто сейчас на конференции
Сейчас этот форум просматривают: Альтаир и 0 гостей